Decorative Concrete Process
Perma-Colour
manufactures and distributes a complete range of products used in the decorative concrete industry.
Colour Hardener
Release Agent
- A pigmented hydrophobic (moisture repelling) powder broadcast over the coloured concrete before pattern stamping.
- Imparts the second colour or grout line and texture area colours as the concrete is stamped. Also stops the pattern mats from sticking to the moist concrete.
- Available in 18 colours.
Texture Mats or Pattern Stamping Mats
- Used to impart various textures and patterns in new concrete.
- Available in hard mats and `floppy' mats (for working up against buildings - around structures etc).
- Available in over 30 different patterns.
- Custom patterns/textures made to order.
- A polycoated paper matrix that is floated into the concrete surface.
- Available in 50m2 and 100m2 boxes in different patterns.
- Feature circles and border stencils also available.
- Custom logos made to order.
- Perma-Colour concrete sealers are specially formulated to seal and protect concrete surfaces, providing a low maintenance stain, oil and dirt resistant barrier.
-
A full range of concrete sealers available for every application:
- Solvent based acrylic sealers including variations for 'same day' sealing and resealing
- Water based acrylic sealers and floor finishes
- Ultra tough high gloss nonyellowing polyurathane sealers
- Including anti-graffiti polyurathanes
- Water based and mineral based epoxy sealers
- Anti-slip products to complement sealers also available.
- Coloured sealers also available in 24 colours.
- A polymer modified cementitious spray on topping material for renovating existing concrete surfaces.
- Available in 24 colours.
- Single pack - just add water.
- A full range of accessories available: eg. Filament tapes, masking plastic, hopper guns etc.
- For repairing degregated or uneven concrete surfaces.
- Available in 4 colours.
- A flexible moisture repelling crack filler used in conjunction with flocrete and self-levelling skim coat.
Patina Stain
Perma-Colour patina stains are designed to lightly etch and penetrate a raw cementitious substrate, to react chemically with its existing free lime and to leave permanent insoluble coloured precipitates in the pores of the substrate.Patina concrete stains provide naturally variagated colours, similar to the oxidation through time of a copper roof, an artists patination of an iron sculpture and the creation by water and wind of desert varnish.
Therefore broad colour variations are not a defect but are in fact the reason for selecting this method of colouration. These stains are not paints or coatings and do not cover up but, rather, work with the existing substrate.
Additional colours to the 8 colour range can be yielded by working over Perma-Colour colour hardened or skim coated substrates. Concrete Dyes
- A water based dye used in conjunction with patina staining for achieving colours not normally possible with patina.
- Available in 8 colours.
- A full range of tooling available to complement the decorative concreting professional.
- A full range of cleaning equipment and chemicals for use in preparing for decorative coatings or sealers to be applied.
Additive Range
- All additives for the concreting professional - from bonding agents to surface retardants to make your project easier no matter what the conditions.
Copyright Perma Colour Pty Ltd 1999-2002
Web Design By Daveytronics